Tutorial and Graphics are the copyright of havasu hideout.  It is strictly
forbidden to copy or upload to your own server other than for printing purposes for your own personal use.  The image you make from this tutorial is yours to do with as you wish!

You will need
JASC's PSP7 or 8 - Get it here
Printer Selections.  Unzip the file and place in your PSP Selections Folder.  Use with PSP 7
printer.pspimage file Use with PSP 8
Printer Accessories.  Unzip to a folder of your choice.
You will also need a photograph or image of your own choosing

PLEASE NOTE where instructions differ for PSP8, these will be shown in blue
otherwise follow the regular instructions

To keep the loading time down, I have tried to keep the screen captures to a minimum so when the same effect is used more than once, I have just made a reference to it!

Remember to save your work often!!!

Step 1
Open a New Image 400x400 16 Million Colours Transparent
Open the printer.pspimage file. Shift D to duplicate and then close the original
Set your foreground  to colour #808080
Go to Layers/New Raster Layer and name it "Bottom Tray"
Go to Selections/Load from Disc and choose "hh01bottomtray.sel"
Click on the Bottom Tray Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh01bottomtray
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the Metallic Preset supplied
with PSP changing the depth to 1
Deselect

Step 2
Open the "Grey Pattern" that you downloaded to a folder of your choice
Set your foreground pattern to "greypattern" Scale 100 Angle 0
Go to Layers/New Raster Layer and name it "Back"
Go to Selections/Load from Disc and choose "hh02back.sel"
Click on the Back Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh02back
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the Metallic Preset changing
the depth to 3
Deselect

Step 3
Set your foreground to colour #000000
Go to Layers/New Raster Layer and name it "Ribbon Track "
Go to Selections/Load from Disc and choose "hh03ribbontrack.sel"
Click on the Ribbon Track Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh03ribbontrack
Floodfill
Go to Effects/Texture Effects/Blinds and apply these settings:

Deselect

Step 4
Set your foreground to colour #808080
Go to Layers/New Raster Layer and name it "Top Tray Side"
Go to Selections/Load from Disc and choose "hh04toptrayside.sel"
Click on the Top Tray Side Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh04toptrayside
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the Metallic Preset as in
Step 2 changing the depth to 1
Deselect

Step 5
Set your foreground to colour #000000
Go to Layers/New Raster Layer and name it "Divider"
Go to Selections/Load from Disc and choose "hh05divider.sel"
Click on the Divider Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh05divider
Floodfill
Deselect

Step 6
Set your foreground pattern to "greypattern" Scale 100 Angle 0
Go to Layers/New Raster Layer and name it "Front"
Go to Selections/Load from Disc and choose "hh06front.sel"
Click on the Front Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh06front
Floodfill
Go to Selections/Float
Go to Effects/3D Effects/Cut Out and apply these settings:

Deselect
Go to Effects/3D Effects/Drop Shadow and apply these settings:

Deselect
Go to Selections/Load from Disc and choose "hh07printer.sel"
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh07printer
Go to Selections/Invert and hit delete.  This will get rid of any excess shadow.
Deselect

Step 7
Go to Layers/New Raster Layer and name it "Top"
Go to Selections/Load from Disc and choose "hh08top.sel"
Click on the Top Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh08top
Floodfill
Go to Selections/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 6
Deselect

Step 8
Go to Layers/New Raster Layer and name it "Stripe"
Go to Selections/Load from Disc and choose "hh09stripe.sel"
Click on the Stripe Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh019stripe
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply these settings:

Go to Selections/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 6
Deselect

Step 9
Go to Layers/New Raster Layer and name it "Side"
Go to Selections/Load from Disc and choose "hh10side.sel"
Click on the Side Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh10side
Floodfill
Go to Selections/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 6
Deselect

Step 10
Set your foreground colour to #FFFFFF
Go to Layers/New Raster Layer and name it "Paper"
Go to Selections/Load from Disc and choose "hh11bottompaper.sel"
Click on the Paper Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh1bottompaper
Floodfill
Go to Selections/Load from Disc and choose "hh12bottompaper1.sel"
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh12bottompaper1
Go to Effects/Texture Effects/Blinds and apply these settings:

Deselect

Step 11
Open up the photograph or image of your choice.  Resize to approximately
189 x 142 pixels.
Go to Image/Flip/Edit/Copy
Make sure your printer is the current image
Go to Layers/New Raster Layer and name it "Top Paper"
Go to Selections/Load from Disc and choose "hh13toppaper.sel"
Click on the Top Paper Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh13toppaper
Go to Edit/Paste/Into Selection
Go to Effects/Sharpen/Sharpen
Deselect

Step 12
Set your foreground to colour #808080
Go to Layers/New Raster Layer and name it "Buttons"
Go to Selections/Load from Disc and choose "hh14buttons.sel"
Click on the Buttons Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh14buttons
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the standard Metallic preset
Deselect

Step 13
Set your foreground pattern to "greypattern" Scale 100 Angle 0
Go to Layers/New Raster Layer and name it "Button 1"
Go to Selections/Load from Disc and choose "hh15button1.sel"
Click on theButton 1 Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh15button1
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the Metallic preset changing
the depth to 1
Deselect

Step 14
Set your foreground colour to #00FF00
Go to Layers/New Raster Layer and name it "Green Button "
Go to Selections/Load from Disc and choose "hh16button.sel"
Click on the Green Button Layer
Go to Selections/Load Save Selection/Load Selection from Alpha Channel. Use the drop down arrow and select hh16button
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the Metallic preset changing
the depth back to 5
Deselect

Go to Layers/Merge/Merge Visible
If you would like to add a wire make sure you add a layer under the Printer
layer

Save as a tube or psp image for later use.

I hope you have enjoyed this tutorial.  Please feel free to email me if you have any questions to fran@havasuhideout.com

Tutorial written June 26 2003

Back to The Computer
To Tutorials
To havasu hideout