Tutorial and Graphics are the
copyright of havasu hideout. It is strictly forbidden to copy or upload to your own server other than for printing purposes
for your own personal use. The image you make from this tutorial is yours
to do with as you wish!
A big thank you to Suz
for testing this one for me!
To make the different versions
go to the bottom of the page and
click on the one you
would like to make!
If you have already made the Grandpa then skip
Steps 1 through 16
PLEASE NOTE where instructions differ for
PSP8, these will be shown in blue
otherwise follow the regular instructions
Step 1
Open a New Image 400x400 16 Million Colours Transparent
Open the
grandpaxmas.pspimage file. Shift D to duplicate and
then close the original
Set your foreground colour to #000000
Go to Layers/New Raster Layer and name it "Wire"
Go to Selections/Load from Disc and choose "01wire.sel" Click on the Wire Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 01wire
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the Metallic Preset
provided with PSP
Deselect
Step 2
Change your foreground colour to #FFE3B7
Go to Layers/New Raster Layer and name it "Plaque"
Go to Selections/Load from Disc and choose "02plaque.sel" Click on the Plaque Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 02plaque
Floodfill
Go to Selections/Float
Go to Effects/3D Effects/Cutout and apply these settings:
Reapply the Cut Out changing the vertical and horizontal to
-2
Deselect
Step 3
Change your foreground colour to #000000
Go to Layers/New Raster Layer and name it "Plaque Detail"
Go to Selections/Load from Disc and choose "03plaquedetail.sel" Click on the Plaque Detail Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 03plaquedetail
Floodfill
Deselect
Step 4
Change your foreground colour to #FFE3B7
Go to Layers/New Raster Layer and name it "Head"
Go to Selections/Load from Disc and choose "04head.sel" Click on the Head Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 04head
Floodfill
Go to Selections/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 2
Reapply the Cut Out changing the vertical and horizontal to -2
Deselect
Step 5
Change your foreground to #FFFFFF
Go to Layers/New Raster Layer and name it "Eye1"
Go to Selections/Load from Disc and choose "05eye1.sel" Click on the Eye 1 Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 05eye1
Floodfill
Go to Effects/3D Effects/Drop Shadow and apply these settings:
Deselect
Step 6
Change your foreground colour to #0000C0
Go to Layers/New Raster Layer and name it "Eye2"
Go to Selections/Load from Disc and choose "06eye2.sel" Click on the Eye 2 Layer
Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 06eye2
Floodfill
Deselect
In your Layer Palette lower the opacity to 50
Step 7
Change your foreground colour to #000000
Go to Layers/New Raster Layer and name it "Eye3"
Go to Selections/Load from Disc and choose "07eye3.sel" Click on the Eye 3 Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 07eye3
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the Round Preset provided
with PSP
Deselect
Go to Effects/Blur/Gaussian Blur and apply a Radius of 0.75
Go to your Layer Palette and hide all but the "Eye" layers
Go to Layers/Merge/Merge Visible and rename this layer "Eyes"
PSP 8 ignore the merge instruction
Step 08
Change your foreground colour to #FFE3B7
Go to Layers/New Raster Layer and name it "Nose"
Go to Selections/Load from Disc and choose "08nose.sel" Click on the Nose Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 08nose
Floodfill
Deselect
Go to Effects/3D Effects/Inner Bevel and apply these settings:
Go to Effects/3D Effects/Drop Shadow and apply the same
settings
as in Step 5 changing the Vertical to 2 and the Horizontal to 0 and the
Opacity to 31
Step 09 Change your foreground colour to #FF0000 Go to Layers/New Raster Layer and name it "Mouth"
Go to Selections/Load from Disc and choose "09mouth.sel" Click on the Mouth Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 09mouth
Floodfill
Deselect
Go to Effects/3D Effects/Inner Bevel and apply the same settings
as in Step 08
Go to Effects/3D Effects/Drop Shadow and apply the same settings
as in Step 05 - the values will still
be there
In your Layer Palette lower the opacity to 62
Step 10
Change your foreground colour to #F28A8A Go to Layers/New Raster Layer and name it "Cheeks"
Go to Selections/Load from Disc and choose "10cheeks.sel" Click on the Cheeks Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 10cheeks
Floodfill
Deselect
Step 11
Change your foreground colour to #8B5F16 Go to Layers/New Raster Layer and name it "Ear Detail"
Go to Selections/Load from Disc and choose "11eardetail.sel" Click on the Ear Detail Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 11eardetail
Floodfill
Deselect
Step 12
Change your foreground colour to #FFFFFF
Go to Layers/New Raster Layer and name it "Hair Man"
Go to Selections/Load from Disc and choose "12hairman.sel" Click on the Hair Man Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 12hairman
Floodfill
Deselect
Select your Eye Candy 4 Jiggle and apply these settings:
Step 13
Go to Layers/New Raster Layer and name it "Eyebrows"
Go to Selections/Load from Disc and choose "13eyebrows.sel" Click on the Eyebrows Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 13eyebrows
Floodfill
Deselect
Select your Eye Candy 4 Jiggle and apply the same settings as
in
Step 12 - the values will still be there
Step 14
Go to Layers/New Raster Layer and name it "Moustache"
Go to Selections/Load from Disc and choose "14moustache.sel" Click on the Moustache Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 14moustache
Floodfill
Deselect
Select your Eye Candy 4 Jiggle and apply the same settings as
in
Step 12 - the values will still be there
Step 15
Open the glasses image that you downloaded to a folder of your choice
Go to Edit/Copy
Go to Layers/New Raster Layer and name it "Glasses"
Go to Selections/Load from Disc and choose "15glasses.sel" Click on the Glasses Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 15glasses
Go to Edit/Paste/Into Selection
Deselect
Step 16
Open the bowtie image that you downloaded to a folder of your choice
Go to Edit/Copy
Go to your Layer Palette and highlight the "Plaque Detail" layer
Go to Layers/New Raster Layer and name it "Bow Tie"
Go to Selections/Load from Disc and choose "16bowtie.sel" Click on the Bow Tie Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 16bowtie
Go to Edit/Paste/Into Selection
Deselect
Go to Effects/3D Effects/Drop Shadow and apply the same settings
as in Step 05 - the values will still
be there
Step 17 Go to your Layer Palette and highlight the "Glasses" Layer Change your foreground colour to #B30000
Go to Layers/New Raster Layer and name it "Hat"
Go to Selections/Load from Disc and choose "17hat.sel" Click on the Hat Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 17hat
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the same settings
as in Step 8 - the values will still be there
Deselect
Go to Effects/Noise/Add 10% Uniform
Step 18
Change your foreground colour to #FFFFFF
Go to Layers/New Raster Layer and name it "Hat Bobble"
Go to Selections/Load from Disc and choose "18hatbobble.sel" Click on the Hat Bobble Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 18hatbobble
Floodfill
Deselect
Select your Eye Candy 4 Jiggle and apply these settings:
Go to Selections/Select
All/Selections/Float/Selections/Invert
Go to Effects/3D Effects/Drop Shadow and apply these settings:
Deselect
Go to Effects/Noise/Add 10% Uniform
Step 19
Go to Layers/New Raster Layer and name it "Hat Fur"
Go to Selections/Load from Disc and choose "19hatfur.sel" Click on the Hat Fur Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 19hatfur
Floodfill
Deselect
Select your Eye Candy 4 Jiggle and apply the same settings as in
Step 18
- values will still be there Go to Selections/Select
All/Selections/Float/Selections/Invert
Go to Effects/3D Effects/Drop Shadow and apply the same settings as
in Step 18 changing the Horizontal to -3
Deselect
Go to Effects/Noise/Add 10% Uniform
Step 19
Change your foreground colour to #025002
Go to Layers/New Raster Layer and name it "Wording"
Go to Selections/Load from Disc and choose "20wording1.sel" Click on the Wording Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 20wording1
Floodfill
Change your foreground colour to #B30000
On the same layer go to Selections/Load from Disc and choose
"21wording2.sel"
Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 21wording2
Floodfill
Deselect
Go to Effects/3D Effects/Drop Shadow and apply these settings:
Step 20
Open the plaquedecor image that you downloaded to a folder of your choice
Go to Edit/Copy
Go to Layers/New Raster Layer and name it "Plaque Decor"
Go to Selections/Load from Disc and choose "22plaquedecor.sel" Click on the Plaque Decor Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 22plaquedecor
Go to Edit/Paste/Into Selection
Deselect
Go to Effects/3D Effects/Drop Shadow and apply the same settings
as as in Step 19
When everything is how you want it to be go to
Layers/Merge/Merge Visible.
Save as a tube or psp image for later use.
