Tutorial and Graphics are the
copyright of havasu hideout. It is strictly forbidden to copy or upload to your own server other than for printing purposes
for your own personal use. The image you make from this tutorial is yours
to do with as you wish!
A big thank you to Suz
for testing this one for me!
To make the different versions
go to the bottom of the page and
click on the one you
would like to make!
PLEASE NOTE where instructions differ for
PSP8, these will be shown in blue
otherwise follow the regular instructions
Step 1
Open a New Image 400x400 16 Million Colours Transparent
Open the
grandmapa.pspimage file. Shift D to duplicate and
then close the original
Set your foreground colour to #000000
Go to Layers/New Raster Layer and name it "Wire"
Go to Selections/Load from Disc and choose "01wire.sel" Click on the Wire
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 01wire
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the Metallic Preset provided with PSP7
Deselect
Step 2
Change your foreground colour to #FFE3B7
Go to Layers/New Raster Layer and name it "Plaque"
Go to Selections/Load from Disc and choose "02plaque.sel" Click on the Plaque
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 02plaque
Floodfill
Go to Selections/Float
Go to Effects/3D Effects/Cutout and apply these settings:
Reapply the Cut Out changing the vertical and horizontal to
-2
Deselect
Step 3
Change your foreground colour to #000000
Go to Layers/New Raster Layer and name it "Plaque Detail"
Go to Selections/Load from Disc and choose "03plaquedetail.sel" Click on the Plaque Detail
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 03plaquedetail
Floodfill
Deselect
Step 4
Change your foreground colour to #FFE3B7
Go to Layers/New Raster Layer and name it "Head1"
Go to Selections/Load from Disc and choose "04head1.sel" Click on the Head 1
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 04head1
Floodfill
Go to Selections/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 2
Reapply the Cut Out changing the vertical and horizontal to -2
Deselect
Step5
Go to Layers/New Raster Layer and name it "Head2"
Go to Selections/Load from Disc and choose "05head2.sel" Click on the Head 2
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 05head2
Floodfill
Go to Selections/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 2
Reapply the Cut Out changing the vertical and horizontal to -2
Deselect
Step 6
Change your foreground to #FFFFFF
Go to Layers/New Raster Layer and name it "Eye1"
Go to Selections/Load from Disc and choose "06eye1.sel" Click on the Eye1
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 06eye1
Floodfill
Go to Effects/3D Effects/Drop Shadow and apply these settings:
Deselect
Step 7
Change your foreground colour to #0000C0
Go to Layers/New Raster Layer and name it "Eye2"
Go to Selections/Load from Disc and choose "07eye2.sel" Click on theEye 2
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 07eye2
Floodfill
Deselect
Change your foreground colour to #148A14
Go to Layers/New Raster Layer and name it "Eye 3"
Go to Selections/Load from Disc and choose "08eye3.sel" Click on the Eye 3
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 08eye3
Floodfill
Deselect
In your Layer Palette lower the opacity to 50
Step 8
Change your foreground colour to #000000
Go to Layers/New Raster Layer and name it "Eye 4"
Go to Selections/Load from Disc and choose "09eye4.sel" Click on the Eye 4
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 09eye4
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the Round Preset provided
with PSP
Deselect
Go to Effects/Blur/Gaussian Blur and apply a Radius of 0.75
Step 9
Go to Layers/New Raster Layer and name it "Eyelashes"
Go to Selections/Load from Disc and choose "10eyelashes.sel" Click on the EyelashesLayer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 10eyelashes
Floodfill
Go to your Layer Palette and hide all but the "Eye and Eyelashes" layers
Go to Layers/Merge/Merge Visible and rename this layer "Eyes"
PSP 8 ignore the merge instruction
Step 10
Change your foreground colour to #FFE3B7
Go to Layers/New Raster Layer and name it "Nose"
Go to Selections/Load from Disc and choose "11nose.sel" Click on the Nose
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 11nose
Floodfill
Deselect
Go to Effects/3D Effects/Inner Bevel and apply these settings:
Go to Effects/3D Effects/Drop Shadow and apply the same
settings
as in Step 6 changing the Vertical to 2 and the Horizontal to 0 and the
Opacity to 31
Step 11 Change your foreground colour to #FF0000 Go to Layers/New Raster Layer and name it "Mouth"
Go to Selections/Load from Disc and choose "12mouth.sel" Click on the Mouth
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 12mouth
Floodfill
Deselect
Go to Effects/3D Effects/Inner Bevel and apply the same settings
as in Step 10
Go to Effects/3D Effects/Drop Shadow and apply the same settings
as in Step 6 - the values will still
be there
In your Layer Palette lower the opacity to 62
Step 12
Change your foreground colour to #F28A8A Go to Layers/New Raster Layer and name it "Cheeks"
Go to Selections/Load from Disc and choose "13cheeks.sel" Click on the CheeksLayer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 13cheeks
Floodfill
Deselect
Step 13
Change your foreground colour to #8B5F16 Go to Layers/New Raster Layer and name it "Ear Detail"
Go to Selections/Load from Disc and choose "14eardetail.sel" Click on the Ear Detail
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 14eardetail
Floodfill
Deselect
Step 14
Change your foreground colour to #FFFFFF
Go to Layers/New Raster Layer and name it "Hair Man"
Go to Selections/Load from Disc and choose "15hairman.sel" Click on the Hair Man
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 15hairman
Floodfill
Deselect
Select your Eye Candy 4 Jiggle and apply these settings:
Step 15
Go to Layers/New Raster Layer and name it "Eyebrows"
Go to Selections/Load from Disc and choose "16eyebrows.sel" Click on the Eyebrows
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 16eyebrows
Floodfill
Deselect
Select your Eye Candy 4 Jiggle and apply the same settings as
in Step 14 - the values will
still be there
Step 16
Go to Layers/New Raster Layer and name it "Moustache"
Go to Selections/Load from Disc and choose "17moustache.sel" Click on the Moustache
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 17moustache
Floodfill
Deselect
Select your Eye Candy 4 Jiggle and apply the same settings as
in Step 14 - the values will
still be there
Step 17
Open the glasses image that you downloaded to a folder of your choice
Go to Edit/Copy
Go to Layers/New Raster Layer and name it "Glasses"
Go to Selections/Load from Disc and choose "18glasses.sel" Click on the GlassesLayer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 18glasses
Go to Edit/Paste/Into Selection
Deselect
Step 18
Open the hair image that you downloaded to a folder of your choice
Go to Edit/Copy
Go to Layers/New Raster Layer and name it "Hair Lady"
Go to Selections/Load from Disc and choose "19hairlady.sel" Click on the Hair Lady
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 19hairlady
Go to Edit/Paste/Into Selection
Deselect
Go to Effects/3D Effects/Drop Shadow and apply the same settings
as in Step 6 - the values will still
be there
Step 19
Open the bowtie image that you downloaded to a folder of your choice
Go to Edit/Copy
Go to your Layer Palette and highlight the "Plaque Detail" layer
Go to Layers/New Raster Layer and name it "Bow Tie"
Go to Selections/Load from Disc and choose "20bowtie.sel" Click on the Bow TieLayer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 20bowtie
Go to Edit/Paste/Into Selection
Deselect
Go to Effects/3D Effects/Drop Shadow and apply the same settings
as in Step 6 - the values will still
be there
Step 20
Open the necklace image that you downloaded to a folder of your choice
Go to Edit/Copy
Go to Layers/New Raster Layer and name it "Necklace"
Go to Selections/Load from Disc and choose "21necklace.sel" Click on the Necklace
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 21necklace
Go to Edit/Paste/Into Selection
Deselect
Go to Effects/3D Effects/Drop Shadow and apply the same settings
as in Step 6 - the values will still
be there
Step 19
Change your foreground colour to #000000
Go to your Layer Palette and highlight the top layer
Go to Layers/New Raster Layer and name it "Wording"
Go to Selections/Load from Disc and choose "22wording.sel" Click on the Wording
Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select 22wording
Floodfill
Deselect
Go to Effects/3D Effects/Drop Shadow and apply the same settings
as in Step 6 - the values will still
be there
Step 20
Open the heart image that you downloaded to a folder of your choice
Go to Edit/Copy
Go to Layers/New Raster Layer and name it "Heart"
Paste anywhere you want on the plaque!
Go to Effects/3D Effects/Drop Shadow and apply the same settings
as in Step 6 - the values will still
be there
When everything is how you want it to be go to
Layers/Merge/Merge Visible.
Save as a tube or psp image for later use.
