Tutorial and Graphics are the
copyright of havasu hideout. It is strictly forbidden to copy or upload to your own server other than for printing purposes
for your own personal use. The image you make from this tutorial is yours
to do with as you wish!
You will need
JASC's PSP7 - Get it here Bunnykin Selections. Unzip the file
and place in your PSP Selections Folder. If you do not have a Selections Folder,
make one now. Bunnykin Accessories.
Unzip to a folder of
your choice. Place the Bow Tube and Daisy Tube into your PSP7 Tube Folder
To keep the loading time down, I have tried to keep the
screen captures to a minimum so when the same effect is used more than once, I have just
made a reference to it!
Remember to save your work often!!!
Step 1
Open a New Image 400x400 16 Million Colours Transparent
Open the hh.overallfill pattern that you unzipped to a folder of your choice
Set your foreground to pattern and select the overallfill pattern with these settings:
Go to Layers/New Raster Layer and name it "Overall
Pants"
Go to Selections/Load from Disc and choose "hhoverallpants.sel"
Floodfill
Deselect
Step 2
Go to Layers/New Raster Layer and name it "Overall Top"
Go to Selections/Load from Disc and choose "hhoveralltop.sel"
Floodfill
Deselect
Go to Layers/Merge/Merge Visible and rename this layer "Overalls"
Go to Selections/Select All/Selections/Float
Go to Effects/3D Effects/Cut Out and apply these settings:
Reapply the Cut Out but change the Vertical and Horzontal
to -3
Deselect
Step 3
Change your foreground colour to #E2CAA0
Go to Layers/New Raster Layer and name it "Left Foot"
Go to Selections/Load from Disc and choose "hhleftfoot.sel"
Floodfill
Go to Selects/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 2 but
change the shadow colour to #B98259
Reapply the Cut Out but change the Vertical and Horzontal to -3
Deselect
Step 4
Go to Layers/New Raster Layer and name it "Right Foot"
Go to Selections/Load from Disc and choose "hhrightfoot.sel"
Floodfill
Go to Selects/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 2
Reapply the Cut Out but change the Vertical and Horzontal to -3
Deselect
Step 5
Go to Layers/New Raster Layer and name it "Chest"
Go to Selections/Load from Disc and choose "hhchest.sel"
Floodfill
Go to Selects/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 2
Reapply the Cut Out but change the Vertical and Horzontal to -3
Deselect
Step 6
Go to Layers/New Raster Layer and name it "Left Arm"
Go to Selections/Load from Disc and choose "hhleftarm.sel"
Floodfill
Go to Selects/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 2
Reapply the Cut Out but change the Vertical and Horzontal to -3
Deselect
Step 7
Go to Layers/New Raster Layer and name it "Right Arm"
Go to Selections/Load from Disc and choose "hhrightarm.sel"
Floodfill
Go to Selects/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 2
Reapply the Cut Out but change the Vertical and Horzontal to -3
Deselect
Step 8
Open the hh.pantrimfill pattern that you unzipped to a folder of your choice
Set your foreground to pattern and select the pantrimfill pattern with these settings:
Go to Layers/New Raster Layer and name it "Left Pant
Trim"
Go to Selections/Load from Disc and choose "hhleftpanttrim.sel"
Floodfill
Go to Selects/Float
Go to Effects/3D Effects/Cut Out and apply these settings:
Reapply the Cut Out but change the Vertical and Horzontal
to -1
Deselect
Step 9
Go to Layers/New Raster Layer and name it "Right Pant Trim"
Go to Selections/Load from Disc and choose "hhrightpanttrim.sel"
Floodfill
Go to Selects/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 8
Step 10
Change your foreground colour to #E2CAA0
Go to Layers/New Raster Layer and name it "Head"
Go to Selections/Load from Disc and choose "hhhead.sel"
Floodfill
On the same layer go to Selections/Load from Disc and choose "hhleftear.sel"
Floodfill
On the same layer go to Selections/Load from Disc and choose "hhrightear.sel"
Floodfill
Deselect
Go to Selections/Select All/Selections/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 2 but
change the shadow colour to #B98259
Reapply the Cut Out but change the Vertical and Horzontal to -3
Deselect
Step 11
Change your foreground to the hh.pantrimfill with the same settings as in Step
8
Go to Layers/New Raster Layer and name it "Inner Left Ear"
Go to Selections/Load from Disc and choose "hhinnerleftear.sel"
Floodfill
Go to Selects/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 2 but
change the shadow colour to #000000
Reapply the Cut Out but change the Vertical and Horzontal to -3
Deselect
Step 12
Go to Layers/New Raster Layer and name it "Inner Right Ear"
Go to Selections/Load from Disc and choose "hhinnerrightear.sel"
Floodfill
Go to Selects/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 2 shadow
colour to
Reapply the Cut Out but change the Vertical and Horzontal to -3
Deselect
Step 13
Go to the Layer Palette and highlight the Left Foot Layer
Select your Retouch Tool with these settings:
Use the Smudge Tool on the Left Foot to push the edges out
so that it looks fuzzy and hairy!! The more smudging you do the fuzzier it will look!
Repeat for each of these layers
Right Foot/Chest/Right Arm/Left Arm/Head/Left Inner Ear/Right Inner Ear/Face
Step 14 Open the Face.psp that you unzipped to a folder of your choice
Go to Edit/Copy
Make sure your Bunnykin is the current image and paste the face onto the head of the
bunnykin as a new layer. Rename this layer "Face"
