Tutorial and Graphics are the
copyright of havasu hideout. It is strictly forbidden to copy or upload to your own server other than for printing purposes
for your own personal use. The image you make from this tutorial is yours
to do with as you wish!
PLEASE NOTE where instructions differ for
PSP8, these will be shown in blue
otherwise follow the regular instructions
To keep the loading time down, I have tried to keep the screen captures to a minimum so
when the same effect is used more than once, I have just made a reference to it!
Remember to save your work often!!!
Step 1
Open a New Image 400x400 16 Million Colours Transparent
Open the
beachchair.pspimage file. Shift D to duplicate and
then close the original
Set your foreground to colour #F396F3
Go to Layers/New Raster Layer and name it "Front Support"
Go to Selections/Load from Disc and choose "hh01frontsupport.sel" Click on the Front Support Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select hh01frontsupport
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply these settings:
Deselect
Step 2 Go to Layers/New Raster Layer and name it "Front Support 1"
Go to Selections/Load from Disc and choose "hh02frontsupport1.sel" Click on the Front Support1 Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select hh02frontsupport1
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the same settings as in
Step 1 Deselect
Step 3 Go to Layers/New Raster Layer and name it "Front Support2 "
Go to Selections/Load from Disc and choose "hh03frontsupport2.sel" Click on the Front Support2 Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select hh03frontsupport2
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the same settings as in
Step 1 Deselect
Step 4 Go to Layers/New Raster Layer and name it "Back Support "
Go to Selections/Load from Disc and choose "hh04backsupport.sel" Click on the Back Support Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select hh04backsupport
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the same settings as in
Step 1 Deselect
Step 5 Go to Layers/New Raster Layer and name it "Top Slats"
Go to Selections/Load from Disc and choose "hh05topslats.sel" Click on the Top Slats Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select hh05topslats
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the same settings
as in Step 1
Deselect
Step 6 Go to Layers/New Raster Layer and name it "Top Slats1"
Go to Selections/Load from Disc and choose "hh06topslats1.sel" Click on the Top Slats1 Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select hh06topslats1
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the same settings
as in Step 1
Deselect
Step 7 Go to Layers/New Raster Layer and name it "Top Frame"
Go to Selections/Load from Disc and choose "hh07topframe.sel" Click on the Top Frame Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select hh07topframe
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the same settings
as in Step 1
Deselect
Step 8 Go to Layers/New Raster Layer and name it "Bottom Slats"
Go to Selections/Load from Disc and choose "hh08bottomslats.sel" Click on the Bottom Slats Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select hh08bottomslats
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the same settings
as in Step 1
Deselect
Step 9 Go to Layers/New Raster Layer and name it "Bottom Slats1"
Go to Selections/Load from Disc and choose "hh09bottomslats1.sel" Click on the Bottom Slats1 Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select hh09bottomslats1
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the same settings
as in Step 1
Deselect
Step 10 Go to Layers/New Raster Layer and name it "Bottom Frame"
Go to Selections/Load from Disc and choose "hh10bottomframe.sel" Click on the Bottom FrameLayer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select hh10bottomframe
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the same settings
as in Step 1
Deselect
Step 11 Open the "Pattern Pink" that you downloaded to a folder of your choice Set your foreground pattern to "patternpink" Scale 25 Angle 0 Go to Layers/New Raster Layer and name it "Bottom Cover"
Go to Selections/Load from Disc and choose "hh11bottomcover.sel" Click on the Bottom Cover Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select hh11bottomcover
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the same settings
as in Step 1
DO NOT DESELECT
Go to Selections/Float
Go to Effects/3D Effects/Cut Out and apply these settings:
Deselect
Step 12 Go to Layers/New Raster Layer and name it "Top Cover"
Go to Selections/Load from Disc and choose "hh12topcover.sel" Click on the Top Cover Layer Go to Selections/Load Save Selection/Load Selection
from Alpha Channel. Use the drop down arrow and select hh12topcover
Floodfill
Go to Effects/3D Effects/Inner Bevel and apply the same settings
as in Step 1
DO NOT DESELECT
Go to Selections/Float
Go to Effects/3D Effects/Cut Out and apply the same settings as in Step 11 Deselect
Go to Layers/Merge/Merge Visible
Save as a tube or psp image for later use.
I hope you have enjoyed this tutorial. Please feel
free to email me if you have any
questions to
fran@havasuhideout.com
